Skip to main content
  • Protein family review
  • Published:

The ring-type polymerase sliding clamp family

Abstract

Ring-type polymerases consist of a DNA polymerase, a ring-shaped sliding clamp protein and a clamp-loading complex. Sliding clamp proteins are found in all organisms and are called proliferating cell nuclear antigen (PCNA) in eukaryotes and the β clamp in prokaryotes. Both PCNA and β form a ring around DNA, which is made up of two subunits of three domains each in β but three subunits of two domains each in PCNA. Despite this difference and a lack of detectable sequence homology, the structures of the two rings are very similar. The sliding clamp slides along DNA and tethers the polymerase to the DNA, enabling rapid and processive DNA replication.

Gene organization and evolutionary history

The ring-type polymerases (also called replicases) are found in all organisms and consist of three major components: the DNA polymerase, a protein ring or sliding clamp, and a clamp-loading complex. Their primary role is to replicate the genome. In this review, we focus on the sliding clamp proteins.

Classification

The prokaryotic sliding clamp is a protein referred to as β and the eukaryotic sliding clamp is called proliferating cell nuclear antigen (PCNA). The T4 bacteriophage also utilizes a ring-type polymerase; its sliding clamp, called gene protein 45, is a trimer similar to PCNA (see Figure 1), but lacks homology to either PCNA or β [1,2].

Figure 1
figure 1

Sliding clamp rings of different organisms. Clamps are constructed from either two or three monomers to yield a ring composed of six domains. (a) The prokaryotic β subunit contains three domains, whereas PCNA and T4 gp45 are about two thirds the size of β and comprise only two domains each. The crystal structures of the oligomeric rings: (b) E. coli β; (c) human PCNA; (d) T4 phage gp45. In (b-d), the interfaces between protomers are indicated by the arrows, and the domains within each monomer unit are numbered (1-3 for β and 1,2 for PCNA and gp45).

Gene organization

The location of the dnaN gene, which encodes the β sliding clamp protein, is conserved among prokaryotes. In both the Gram-negative and the Gram-positive genomes sequenced to date, the dnaN gene is embedded between the dnaA and the recF genes, within the replicative-origin region of the bacterial chromosome. Even though differences in the organization of bacterial origins have tentatively resulted in three classes of origins, the position of dnaN relative to dnaA and recF is conserved in all classes [3]. The promoter and the regulatory sequences of the dnaN gene operate from within the dnaA gene, but expression of the β subunit is independent of DnaA [4].

The final transcript of the human PCNA gene contains six exons. The PCNA gene has been mapped to chromosome 20, but two pseudogenes have been identified on chromosomes X and 6 [5].

Evolutionary history

The ring-type polymerases are found in all organisms, both prokaryote and eukaryote. The existing body of genome sequence information indicates that the β sliding clamp proteins are highly conserved in prokaryotes, and PCNA is highly conserved among eukaryotes. Interestingly, β and PCNA show no sequence homology, even though they have very similar three-dimensional structure [6]. Homologs to Escherichia coli β protein are readily identified in all the numerous prokaryotic genome sequences by simple BLAST searches. There is at least one example of an organism (Sulfolobus solfataricus) that encodes two β homologs, and others may yet appear. The PCNA sequence is fairly well conserved among eukaryotes. In general, there is only one gene encoding PCNA, but the organism Daucus carota (carrot) encodes two PCNA homologs, one of which is expressed only during embryogenesis.

Characteristic structural features

The sliding clamp is formed from identical protomers that oligomerize to form a ring that encircles DNA [7,8]. The ring does not self-assemble onto internally primed sites. Rather, it requires the clamp loader, which harnesses the energy of ATP hydrolysis to open the ring, to position DNA within it, and to close the clamp (Figure 2).

Figure 2
figure 2

The action of the three components of the ring-type DNA polymerases. The protein ring (sliding clamp) is assembled onto a primed template junction by a clamp-loader complex in an ATP-driven reaction. The DNA polymerase (Pol) then assembles with the ring on DNA to form a highly processive polymerase, which pulls the ring along behind it during chain extension while remaining tethered to DNA by the ring.

The β clamp of the Escherichia coli replicase is a homodimer of crescent-shaped 40 kDa subunits arranged head-to-tail to form a ring (Figure 1). The crystal structure of β reveals that each monomer is constructed from three globular domains, each with the same chain fold [7]. The inside diameter of the ring of both β and PCNA is approximately 35 Å, allowing ample room to encircle the DNA duplex.

The structure of eukaryotic PCNA is practically superimposable on that of the β clamp [4,9]. The monomeric unit is only about two-thirds the size of β, however; it consists of two globular domains instead of three and trimerizes to form a six-domain ring the size of the β dimer (Figure 1). Although the PCNA domain structure is essentially the same as that of the domain structure in β, no sequence homology is detected between the two families. Perhaps the multidomain structure evolved from a common ancestral gene encoding one domain that later underwent duplications and fusion events to form the three-domain monomer.

Localization and function

The ring-type polymerases are ubiquitous in all cells. Their primary role is to replicate the genome [4,10,11]. They are highly processive enzymes and extend DNA at high speed. The DNA polymerase component is relatively poor in DNA synthesis because it dissociates from DNA after synthesis of only a few nucleotides (called 'distributive action'), and must rebind to DNA to continue synthesis. But when coupled with the sliding clamp and the clamp-loading complex, it becomes rapid and highly processive. The sliding clamp slides freely on duplex DNA [12] and binds directly to the DNA polymerase, thereby acting as a mobile tether to hold the polymerase to the DNA template during synthesis.

The ring-type polymerases are utilized for chromosome replication, but are also involved in other processes. For example, the E. coli DNA polymerase III holoenzyme is required in mismatch repair. In eukaryotes, PCNA is involved in both excision and mismatch repair.

Expression of the PCNA gene is associated with the proliferative state of the cell. The promoter sequence contains binding sites for several transcription factors. Transcription of PCNA is stimulated by a number of growth factors, so it is not surprising that the expression of PCNA is lowest in quiescent cells.

Frontiers

As the ring-type polymerases are involved in processes other than DNA replication, it seems likely that future studies will reveal how this three-component machinery interfaces with yet other proteins to perform its role, not only in replication, but in DNA repair and possibly recombination as well.

References

  1. Young MC, Reddy MK, von Hippel PH: Structure and function of the bacteriophage T4 DNA polymerase holoenzyme. Biochemistry. 1992, 31: 8675-8690. This short review provides an excellent overview of the T4 replication apparatus.

    Article  CAS  Google Scholar 

  2. Moarefi I, Jeruzalmi D, Turner J, O'Donnell M, Kuriyan J: Crystal structure of the DNA polymerase processivity factor of T4 bacteriophage. J Mol Biol. 2000, 296: 1215-1223. 10.1006/jmbi.1999.3511. The T4 bacteriophage gp45 protein structure was the fourth sliding clamp structure to be solved. As with the yeast PCNA, the structure of this trimeric clamp structurally resembles β, despite the lack of sequence homology.

    Article  CAS  Google Scholar 

  3. Smith DW, Yee TW, Baird C, Krishnapillai V: Pseudomonad replication origins: a paradigm for bacterial origins?. Mol Microbiol. 1991, 5: 2581-2587. This brief review compares general features of three origin classes: enteric origin (Gram-negative), B. subtilis origin (Gram-positive), and pseudomonad origin.

    Article  CAS  Google Scholar 

  4. Kornberg A, Baker T: DNA Replication, 2nd edition. New York: WH Freeman and Co,. 1992, A comprehensive textbook covering the entire replication field written by the leading authority on replication enzymology. It includes chapters on the prokaryotic and eukaryotic replicases.

    Google Scholar 

  5. Travali S, Ku D-H, Rizzo MG, Ottavio L, Beserga R, Calabretta B: Structure of the human gene for the proliferating cell nuclear antigen. J Biol Chem. 1989, 264: 7466-7472. This report thoroughly characterizes organization of the gene that encodes the human PCNA protein.

    CAS  Google Scholar 

  6. NCBI Blast. [http://www.ncbi.nlm.nih.gov/BLAST]

  7. Kong X-P, Onrust R, O'Donnell M, Kuriyan J: Three dimensional structure of the β subunit of E. coli DNA polymerase III holoenzyme: a sliding DNA clamp. Cell. 1992, 69: 425-437. This report details the first crystal structure of a protein ring. The paper details the many unexpected and fascinating structural details by which the β ring is constructed.

    Article  CAS  Google Scholar 

  8. Krishna TSR, Kong X-P, Gary S, Burgers P, Kuriyan J: Crystal structure of the eukaryotic DNA polymerase processivity factor PCNA. Cell. 1994, 79: 1233-1243. The yeast PCNA was the second sliding clamp structure to be solved. This report describes the amazing similarity in structure to β, despite the completely different amino acid sequence.

    Article  CAS  Google Scholar 

  9. Gulbis JM, Kelman Z, Hurwitz J, O'Donnell M, Kuriyan J: Structure of the C-terminal region region of p21WAF1/CIP1 complexed with human PCNA. Cell. 1996, 87: 297-306. A report on the structure of human PCNA complexed to a peptide of p21. This paper shows how this cell cycle regulatory protein attaches to each PCNA monomer; the interaction prevents use of PCNA by the Pol δ replicase.

    Article  CAS  Google Scholar 

  10. Kelman Z, O'Donnell M: DNA polymerase III holoenzyme: structure and function of the chromosomal replicating machine. Annu Rev Biochem. 1995, 64: 171-200. 10.1146/annurev.bi.64.070195.001131. This extensive review is focused mainly on the E. coli DNA polymerase III holoenzyme, and also contains some discussion of the T4 phage replicase and eukaryotic DNA polymerase δ.

    Article  CAS  Google Scholar 

  11. Marians KJ: Prokaryotic DNA replication. Annu Rev Biochem. 1992, 61: 673-719. 10.1146/annurev.bi.61.070192.003325. An extensive review of the various prokaryotic replication systems, including E. coli and its bacteriophages.

    Article  CAS  Google Scholar 

  12. Stukenberg PT, Studwell-Vaughan PS, O'Donnell M: Mechanism of the sliding β-clamp of the DNA polymerase III holoenzyme. J Biol Chem. 1991, 266: 11328-11334. The first evidence that a replicase subunit is shaped like a ring. This hypothesis is based on biochemical experiments showing β to be linked to DNA, and the authors reasoned that β bound DNA "... by topologically encircling the duplex like a doughnut."

    CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Irina Bruck.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Bruck, I., O'Donnell, M. The ring-type polymerase sliding clamp family. Genome Biol 2, reviews3001.1 (2001). https://doi.org/10.1186/gb-2001-2-1-reviews3001

Download citation

  • Published:

  • DOI: https://doi.org/10.1186/gb-2001-2-1-reviews3001

Keywords